Digital Water Bath, 110V Laboratory Thermostatic Heating Water Bath, Anti-Dry Burning Electric Lab Water Bath, Timing Function & 304 Stainless Steel Liner

Specification: Capacity: 2.8L Temperature control range: room temperature~99.99℃ Timing range: 0~999min Temperature control precision: ≤±1℃ Temperature display resolution: 0.1℃ Voltage: 110v Heating power: 350W Operation Method 1. Method of use: Place the electric thermostatic water bath on a flat workbench, put in the shelf, add water to the water bath, the amount of water should be higher than the shelf more than 3cm, cover the lid and access to the power supply, turn on the power switch. 2. Temperature setting: Press "⚙" key to enter the temperature setting state, press "＜" key to select the number of digits to be adjusted, press "∨" or "∧" key to adjust to the desired temperature value. Press "⚙" key twice to return to actual temperature interface. Setting is completed, the water bath starts heating. 3. Time setting: Press "⚙" key twice to enter into the time setting state, press "＜" key to select the number of digits to be adjusted, press "∨" or "∧" key to adjust to the desired time value. Press "⚙" key to return to working state. 4. Mode selection: Long press the "⚙" key to enter the parameter setting interface, press the "⚙" key until the first line of the display shows AUT and the AUT value of the second line is 1, that is, it enters the automatic mode, and the PID curve can be corrected without self-tuning; if the AUT value is set to 0, it enters the manual mode 5. Boiling water function: When the target temperature is set to 100 ℃, the whole full power output, so that the work in the boiling water state; when the target temperature is set to 99.9 ℃ or below, regardless of manual or automatic mode, follow the PID control, can not boil water Attention: (1). Water should be changed regularly for normal use to prevent the water quality from becoming hard. (2). Prohibit the use of hard objects when cleaning the water bath to prevent damage to the surface of the device. (3). Long-term use of the water bath should be drained, dry, and unplug the power cord, the water bath placed in a cool dry place. (4). Before restarting the water bath after a long period of non-use, check whether the functions are normal, and then carry out the test. (5). Do not touch the heating vessel with bare hands during use, protective measures should be taken to avoid burns. (6). Do not approach the mouth of the water bath with bare hands under the boiling water condition to avoid steam burns.

• Anti-Dry Burning: The water bath is heated by stainless steel heating tubes and has a built-in liquid level sensor. When the water level in the water bath is low or dry burning, it will issue an alarm and cut off the power automatically to prevent overheating damage to the water bath.
• Constant Temperature Heating: The lab water bath can be heated at room temperature-99.9℃, the temperature control precision is ≤1℃, and the resolution of temperature display is 0.1℃.
• Timing Function: The digital water bath can be set to 0-999min timed heating, of course, you can also choose not to open the timing function.
• 304 Stainless Steel Inner Liner: The inner liner of the laboratory water bath is made of 304 stainless steel, which is not only corrosion-resistant but also easy to clean.
• Circle Lid: The ring lid is made of PC material which can effectively resist aging, and it is suitable for various sizes of beakers.
• Application: Electric digital water bath is mainly used in the laboratory for distillation, drying, concentration, and temperature impregnation of chemicals or biological products. In addition, it can also be used for constant temperature heating and other temperature tests, which is a common tool for education and scientific research.